



It’s been over a week, and I’m still recovering from our Portfolio Development Workshop two weekends ago. I’m getting old… As always, it’s an intense but extremely satisfying weekend that has always ended in joy for all the participants and especially Les and me as we experience the realization, surprise, and satisfaction of the photographers with the work they’ve accomplished.
We’ve done this event for over fifteen years. You’d think we might have it perfected by now, but as always, we don’t. Don’t get me wrong; we’re constantly improving it. We carefully do a post-mortem and formulate things we could do better, things that would reduce stress, things to be more efficient, and most importantly, things to improve the experience of the participants. This particular workshop saw a massive overhaul of my own organization. A technical and architectural update to specifically reduce the amount of work and effort it takes behind the scenes after the participants are done for the day.
A look behind the scenes
My workflow is mostly behind the scenes. Without going into gruesome detail, the second day of the workshop is the most critical. I have to produce a massive amount of printed material. After many revisions and improvements, I didn’t experience a 3AM quitting time Saturday night.
The essential part of this effort is to be virtually finished with the bulk of the print production effort by the time we start Sunday morning. What’s difficult is not only to get the bulk of the printing effort finished but to orchestrate it in a way that all of the participants and Les can start their work upon arrival and also set myself up to finish a lot of the last of the printing while they do their final work. That’s a tricky dance.
How many prints did I make starting late Saturday, ending sometime around lunchtime Sunday? I didn’t have a tick-sheet to record every one, but after a small debate with Les whether it was 115, 120, 125, or whatever, we landed on a semi-accurate number of north of 100. That’s a lot of final prints to make along with text and design elements to get right.
About those mistakes
Les and I print more one-off fine art prints than most people will in a lifetime. We are not an automated, auto-corrected print production facility. So what kind of mistakes did I make? We make them (debatable, but I don’t have the courage to take all of the mistakes on myself; I need a little scapegoating). I could cast blame elsewhere, but the truth is… all of them share the same category: not paying enough attention. All of them are things I know and Les knows happen, and they happen a lot.
When you are moving fast, you make a lot of mistakes very quickly. They cost money, a lot of money given the price of fine art papers and ink. What’s worse is they cost time, and that is deadly when running on a real-time schedule other people are depending on.
Here’s the list of giant time wasters that were easily avoidable if we just paid more attention to the things we do when working just a little bit slower.
Print head strikes. These are inevitable with just about any upward curl in sheet paper. We know this. We check very carefully… most of the time. I ended up re-printing the vast majority of an entire portfolio because we didn’t check that first one.
Misaligned prints, even though subtle, any tiny misalignment of the paper when entering the printer will manifest itself as a crooked print. We already know this is the cause, but… we wasted an immense amount of time debugging, speculating, and trying futile things without looking at the basics first due to a red herring. If sheet paper isn’t absolutely square on the feed end, it will be skewed. We ended up reprinting another entire portfolio or more due to trying hail Marys before realizing one end of one particular box of paper wasn’t square.
Templates are great! My reengineering of how I manage every photo, print setting, template, and all the stuff that goes with it was great! Copy and Paste is great! Until it isn’t. The good news is that all that made reproduction of a few portfolio accoutrements made corrections a snap. The bad news is the errors caused by tiny little overflows of less than a sentence of some longer-than-expected text. Easy enough to see if I just checked!!! I didn’t. More prints. More waste.
The bottom line is that no matter how much you plan, no matter how good you make your theoretical workflow, you just cannot be too careful; there’s no such thing as too careful. Do not assume; take the tiny bit of time to make sure. Really, how much time would it have cost me to just check on these things before I moved on and started the next task? Maybe 30 seconds? That’s an order of magnitude better than re-doing the same work again, and again in one case.


Agree that there are a multitude of factors that contribute to printing errors and with every correction you convince yourself that “I won’t do that again” and invariably “that” happens again.
I recall an unsquare edge or a poorly trimmed roll of paper causing issues years ago at the Print workshop. From the participants’ perspective you and Les amazed us with your attention to detail so these things didn’t unduly interfere with the program.
Appreciate your thoughts and the checklist.
Oh and one more thing. Commercial sheet goods (plywood, MDF, etc) - factory edges are rarely square or parallel. Learned that one over and over more times than I care to admit.